# Triumph Hellfire Flat Tracker

- Link: https://custommotorcycles.info/triumph-hellfire-flat-tracker/
- Published: 2015-08-05T10:07:50-04:00
- Author: Custom Motorcycles

[View Triumph Hellfire Flat Tracker Photo Gallery](https://custommotorcycles.info/triumph-hellfire-flat-tracker/#photogallery)

The **Triumph Hellfire Flat Tracker** gives a middleweight naked motorcycle a distinctly
dirt-track-inspired identity without burying its mechanical core beneath a full 
custom redesign. Motorcorner’s approach is visual and purposeful: a slim seat, number
plates, chunky tyres and a compact tail create the stance, while the original engine
and most of the chassis remain in place.

## A flat-track silhouette with street-bike hardware

The transformation is immediately clear in the side profile. The white-and-gold 
tank leads into a narrow black seat, and the raised tail carries the Hellfire name
in matching gold. White number boards marked “15” sharpen the competition influence,
while the small front plate and stripped-back cockpit keep attention on the bike’s
exposed structure.

The result looks considerably leaner than a conventional road-bike presentation.
The radiator shrouding, black frame and low visual mass around the centre of the
motorcycle give the gold bodywork room to stand out. At the rear, the short seat
unit and visible exhaust routing reinforce the impression of a machine arranged 
around its engine rather than wrapped in bulky bodywork.

## The important change is in the wheels

According to the supplied description, the standout specification change is the 
set of **17-inch spoked wheels**. Their aluminium rims use a spoke-fastening system
that locks the spokes into knuckles on the rim instead of threading them through
conventional holes. That arrangement allows the wheels to run tubeless tyres.

Visually, the spokes preserve the traditional racing character that cast wheels 
would lose. The broad, block-patterned tyres then push the idea further, giving 
the Hellfire a more rugged footprint than the original naked-bike format. They are
central to the conversion’s character: the motorcycle reads as a flat tracker before
the viewer notices the unchanged engine beneath the tank.

## Mostly familiar mechanics

This is not presented as an engine-development project. Motorcorner leaves the engine
internals untouched, and most chassis components are retained. That decision gives
the build a clear focus: alter the motorcycle’s proportions, contact points and 
visual language rather than claim a new performance specification.

The standard-looking fork and brake layout sit comfortably with the custom wheels,
while the gold brake hardware echoes the tank and tail accents. A compact exhaust
canister and neatly routed headers add another layer of visual definition without
overwhelming the blacked-out mechanical package.

## A focused transformation

The Hellfire works because its individual details point in the same direction. The
number boards, high-set tail, spoke wheels and treaded tyres all support the flat-
track theme, while the retained Triumph mechanicals keep the project recognisably
road-bike based. It is a restrained conversion in terms of engineering scope, but
a bold one in silhouette.

## Photo Gallery

[⌊Triumph Hellfire Flattracker⌉⌊Triumph Hellfire Flattracker⌉[
 [⌊Triumph Hellfire Flattracker 3⌉](https://custommotorcycles.info/wp-content/uploads/2015/08/Triumph-Hellfire-Flattracker-3.jpg)