# Sinister Custom Bagger With a 30-Inch Front Wheel

- Link: https://custommotorcycles.info/sinister-custom-bagger/
- Published: 2014-08-28T01:52:14-04:00
- Author: Manny Costa

[View Sinister Custom Bagger With a 30-Inch Front Wheel Photo Gallery](https://custommotorcycles.info/sinister-custom-bagger/#photogallery)

With its saturated orange finish, stretched proportions and enormous front wheel,
this sinister custom bagger was one of the highlights of the 2014 SEMA show. The
build is designed to dominate a display space from every angle, combining a heavily
reshaped touring-style body with a strong black-and-orange contrast.

## Oversized proportions, carefully balanced

The front end sets the motorcycle’s stance. Its oversized wheel, commonly described
as a 30-inch setup in the original title, pushes the fairing high above the ground
and gives the bike a long, low visual profile. A black multi-spoke design keeps 
the wheel from becoming a single block of color, while the exposed brake rotor adds
a sharp mechanical detail against the bright paint.

The matching front fender and painted lower fork area help integrate the wheel into
the rest of the design. Rather than leaving the large rim isolated, the bodywork
carries the same orange treatment forward and ties the front assembly into the tank
and fairing.

## Orange bodywork with darker detail

Nearly every major panel wears the same vivid orange finish, including the swept
fairing, fuel tank, rear fender and extended saddlebags. Black pinstriping or edging
separates several panels and gives the broad surfaces more definition. The tank 
and front fairing also feature raised or airbrushed ornamental artwork, adding texture
without interrupting the motorcycle’s dominant color theme.

The fairing is particularly substantial, with layered surfaces and a pointed upper
profile that make the front of the bike appear wider and more aggressive. A compact
pair of lights sits low in the nose, partly concealed by the surrounding bodywork.
Behind it, a wide handlebar and clean cockpit keep the controls visible without 
competing with the fairing’s shape.

## Mechanical contrast beneath the paint

Orange-painted engine components continue the color strategy into the center of 
the motorcycle. The V-twin’s fins remain visually legible, while black cases and
hardware provide relief from the painted surfaces. Wrapped exhaust headers introduce
a contrasting gray texture and make the exhaust routing a visible part of the design
rather than hiding it completely.

The rear section follows the same show-bike logic. Large, smoothly molded saddlebags
extend the motorcycle’s horizontal line, with rounded lids and painted artwork echoing
the front fender and tank. A two-tone seat breaks up the orange around the rider’s
position and provides one of the few softer visual transitions in an otherwise highly
graphic build.

## A complete show display

Seen at SEMA, this bagger makes its impact through coordination rather than a single
isolated modification. The enormous front wheel establishes the stance, the orange
paint unifies the panels, and the black components keep the presentation from becoming
visually flat. The original material does not identify the builder or provide verified
mechanical specifications, but the finished display clearly centers on proportion,
paint and surface detail.

## Photo Gallery

[⌊big_wheel_by_drivenbychaos-d4brdjl⌉⌊big_wheel_by_drivenbychaos-d4brdjl⌉[
 [⌊DSC_0223⌉](https://custommotorcycles.info/wp-content/uploads/2014/08/DSC_0223.jpg) [⌊DSC_0227⌉](https://custommotorcycles.info/wp-content/uploads/2014/08/DSC_0227.jpg) [⌊DSC_0228⌉](https://custommotorcycles.info/wp-content/uploads/2014/08/DSC_0228.jpg) [⌊ji,
n l⌉](https://custommotorcycles.info/wp-content/uploads/2014/08/jin-l.jpg) [⌊DSC_0229⌉](https://custommotorcycles.info/wp-content/uploads/2014/08/DSC_0229.jpg)